Led downlight wholesale provider in China: Confirm what design pattern for the whole system you prefer. There are about 4 design shapes for the whole lighting system- L shape, I Shape, parallel lines Shape, and Square shape. Square shape. It is suitable for living rooms, and offices. U Shape: Mainly used for living room. L Shape: Good for use in corridors, living rooms, and cloakrooms. I Shape: For the living room, dining room, and kitchen room. Choosing a suitable magnetic track rail: Recessed magnetic track: It is suitable for new houses that have not yet suspended ceilings. It is necessary to make grooves and pre-embed tracks, and then press them with the ceiling. Trimless magnetic rail: It is used in the room where the ceiling has been made, and the hole is directly fixed on the ceiling plasterboard. Surface / Pendant magnet track: Mainly used for places that are without false ceilings or not good for making plasterboard such as supermarkets, offices, etc. Discover even more details at cylinder light.
If you’re in a hurry to buy exterior lights, you might be tempted to spend as little time as possible researching your choices. However, this is something that you should avoid at all costs! Don’t just browse through a couple of sites and then buy the first product that catches your eye. Instead, pay close attention to the details of each individual fixture before choosing one. Most LED landscape lights can connect with one another to create a “string” of light fixtures along your property line. However, incorrectly connecting fixtures – or even the incorrect number of lights in a string – can cause the bulbs to burn out prematurely. In addition, you will end up paying more than necessary for energy consumption. Instead, talk with your local electrician about which lights are compatible for creating “strings” and use the recommended number of bulbs in each string.
When choosing exterior led floodlights, lumen value is more important than power value. Power value (Wattage) measures the energy required to illuminate the product, and lumens determines the brightness of the lamp. This means that the more lumens of the product, the brighter the lamp. Consumers should not choose projection lamps based on the power value (watts), but should consider how much brightness (lumens) they provide us.
GRNLED is a commercial Led floodlight manufacturer, supplier, and factory in China, We can accept OEM/ODM floodlights orders for commercial application. The color temperature can be single color such as 3000K Warm white, 4000K daylight, 6500k cold white, Green / Purple / Orange / Red / Blue, or to be RGB LED Floodlights. Widely applied for commercial outdoor places such as parking lots, backyards, schools, football fields, tennis court lighting, basketball lighting, etc. Technical Support: It is ok to support IES files to do Dialux simulation, providing installation, maintenance guidance, or technical training and lighting design solutions.
The magnetic track light is the latest lighting solution, there is a magnet on the track head of the lamp body, which can be adsorbed on the aluminum magnetic attraction rail track with an iron sheet, and can be removed, installed, and moved freely without tools. Generally, the whole system is consists of the magnetic track, magnetic led light luminaries, and accessories. It is available to do DIY track lighting system by above magnet lamps.
Exterior landscape flood lights: This type of floodlight is mainly used for lighting effects of outdoor landscapes, such as illuminating trees and rockery at night. Their power is mostly less than 50W, and their light-emitting angle is mostly 30°. Mostly used in parks, squares and other places. Low voltage LED flood lights: The input voltage of this kind of floodlight is generally AC/DC12V 24V 36V 48V 60V. Compared with the high-voltage 110Volt or 220VAC input floodlight, the low voltage type will be safer, especially when it is installed outdoors, and easy to be touched by human being. Mostly used in special places such as ships, mines, petrochemicals, petrol stations, etc.
Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.
The magnetic pendant light is a cylinder downlight with hanging ropes for suspended installation as decorative lighting, It is generally used as auxiliary lighting and is mostly used in the study room, bedside table, above the dining table. The CREE/OSRAM/PHILIPS COB chip brings a perfect lighting performance, Magnetic track lighting is a linear track system with magnetic rail and removable magnetic lights, the entire magnetic track lighting system is driven by low-voltage DC24V or DC48V.On the low-voltage magnetic guide rail, various types of lamps such as magnetic line lights, magnetic spotlights, and magnetic chandeliers can be safely combined, freely moved and disassembled. Just read this blog to know the details about it if needed.
What are the types of solar street lights? Standalone Solar Street Lights: Standalone solar street lights are independent of the grid and require no external power supply. They are powered by a solar panel and battery combination and are typically used in remote areas where grid power is not available. Grid-Connected Solar Street Lights: Grid-connected solar street lights are connected to the grid and require an external power supply. They are powered by a solar panel and battery combination and are typically used in urban areas where grid power is available.
Second, the Led driver problem. The main reason is that the electrolytic capacity inside the power supply is insufficient, and the output current and voltage of the lighting system cannot be controlled stably, which makes the LED flood light flashes that turn on and off. Fourth, the floodlight is flooded. Floodlights are often used outdoors, if the waterproof strength is not enough, water ingress is likely to occur. Once water enters, it may cause the LED lamp beads to rust and break. As a result, flickering occurs. Discover extra information on https://grnled.com/.
As a professional led lighting manufacturer and factory, our positioning is to be a customer’s technical, production, after-sales, R&D team, quickly and professionally provide various lighting solutions to solve various lighting problems encountered by customers. Our customers only need to do a good job in the sales of LED lamps, the other things such as controlling cost, lighting design & solutions, and after-sales, we will help customers deal with it in order to maximize customer benefits.