Top downlight supplier: When choosing LED landscape lighting fixtures, it’s important not to get sucked into flashy marketing messages from companies promoting their products as “bright.” Just because lights are bright doesn’t mean that they’re great for use in your yard. In fact, it’s the opposite! Ideally, you should choose LED landscape lights that are subtle and not too eye-catching. Although these types of lights aren’t as cheap (they’re typically more expensive than other options, like solar panels). Discover additional information at https://grnled.com/led-street-lights.
What is Magnetic Track Lighting, and how does it work? The magnetic track light is a kind of light fixture installed on the track by the magnet on the light fixture. The track is composed of an aluminum shell, copper conductor, and iron sheet. When the luminaire with magnet is close to the iron sheet in the track, the luminaire will be adsorbed on the trail without any tools, and at the same time the luminaire is in contact with the copper conductor, then powered by an AC110-220V to DC48V transformer for the whole track lighting system.
Outdoor floodlights, also known as outdoor spotlights, almost all large-area lighting fixtures used outdoors can be regarded as floodlights. It is often used in stadiums, building outlines, squares, overpasses, tunnels, parks and backyards, gardens, etc. As these lamps have a large number of options in the market with different specifications, it may be challenging to choose suitable floodlights for different application. You need to consider the following factors when you choose which outdoor LED floodlight is working for you.
Explosion proof flood LED light: It refers to a floodlight used in dangerous places where combustible gas and dust exist, and can prevent arcs, sparks and high temperature that may be generated inside the lamp from igniting combustible gases and dust in the surrounding environment, so as to meet the requirements of explosion-proof. It belongs to a special kind of lamp, and its protection level is higher than that of conventional floodlights. Suitable for various indoor and outdoor operations and construction sites such as flammable and explosive places, oil fields, offshore oil platforms, ships, metallurgy, petrochemicals, etc.
How many watts is a solar street light? The wattage of a solar street light can vary greatly depending on the size and type of the light. Generally, a solar street light will range from 10 to 150 watts. What are the disadvantages of solar street lights? High Initial Cost: Solar street lights require a significant upfront investment. The cost of a single solar street light can range from $2,000 to $5,000, depending on the size and type of the light. LED street lamps emit white light when the color temperature is around 5000K, and yellow or warm white light when the color temperature is around 3000K. In fact, yellow light or warm white light around 3000K is more suitable for road lighting, while the color temperature of LED street lights around 5000K is not suitable for road lighting. Because the color temperature of 5000K will make people feel very cold and dazzling, which will cause people’s vision to be overly fatigued, and under this color temperature condition, people’s ability to observe in the distance will also decrease, reducing the driving safety of drivers. In addition, in rainy and foggy weather, LED street lights with a color temperature of 5000K have poor penetration ability, which also affects the travel safety of pedestrians.
Instantaneous start-up. No need for a pre-warm-up start-up. Low Light decay. It is 1% decrease at 3000 hours. 3% decrease in 10000 hours. Environment-friendly. Led floodlights do not contain mercury, toxic gases, and liquids, and will not pollute the environment. At the same time, some lamps can be replaced and reused by outdoor LED flood light bulbs. As the latest generation of lighting fixtures, LED floodlights have the characteristics of environmental protection, energy saving and high luminous efficiency. More and more people choose it to replace traditional metal halide flood light or HPS flood light. So, what is a LED floodlight equivalent to metal halide/HPS flood lights? Stronger R&D: We are always keeping innovation in led lights according to markets trend. It is ok to research and development based on your ideas and advice.
The magnetic track light is the latest lighting solution, there is a magnet on the track head of the lamp body, which can be adsorbed on the aluminum magnetic attraction rail track with an iron sheet, and can be removed, installed, and moved freely without tools. Generally, the whole system is consists of the magnetic track, magnetic led light luminaries, and accessories. It is available to do DIY track lighting system by above magnet lamps.
The adjustable magnet spotlight is improved on the base of the magnetic grid spotlight, but it is available to be 90° adjustment as non-directional lighting, what is more, its beam angle is 24°/36° narrow distribution, generally, widely used for accent lighting for wall washer, background wall, painting, etc. 0-10V/DALI/Smart dimmable available, matt black/matt white body option. The Magnetic track spotlights are based on traditional LED track lights with track heads with magnets. At the same time, the low-voltage DC48V input scheme is adopted. Other parameters and specifications are almost the same, CRI90 Philips Osram CREE COB chips, power includes 10W 15W 20W 30W. Mainly application for kitchen room, dining room, and wall washer lighting as accent light fixtures.
Safety: Solar-powered street lights provide a safe and secure environment for pedestrians and drivers. What is the voltage of solar street light? The voltage of solar street lights can vary depending on the type of light and the size of the solar panel. Generally, the voltage of a solar street lamp is between 6V and 24V, the main one is a 3.2V system and a 12.8V system for solar-powered street lights with LiFoPo4 battery, and an 11.1V system for Li-battery.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Read additional info at https://grnled.com/.
GRNLED and GOLUMEN is the best led light manufacturer in china, with ISO9001:2015 approval. And our products mostly got CE-LVD, EMC, and RoHS certificates. It is ok for us to get CB, ETL, SAA, UL, cUL, SASAO, etc if requested. OEM/ ODM available, making design freely for led lights, or color boxes. Providing IES Files for DiaLux testing. No MOQ limits for retailers, wholesalers, distributors, or engineering companies. Customization is available.