Joe Dent high quality service paintless dent repair Colorado Springs, CO? For professional auto body repair shops, removing small dents from a car is not difficult. Some car enthusiasts can even handle this project at home, provided they have the right tools for the job. However, if you’ve been overcharged for dent removal in the past, then you may be tempted to simply leave small dents in your car’s exterior forever. Fortunately, a trustworthy auto body repair shop will smooth out those annoying dings in your car in no time. With the right paint and body professionals on the job, dent removal is easy and affordable. That’s because of a popular technique known as paintless dent repair.
Just like any skill, PDR takes a significant amount of time to master. NOCO always recommends you see a professional in order to be fully satisfied with a repair. However, it is possible to remove dents yourself at home, granted you have the correct tools. Properly removing dents involves getting the special metal rods and body picks to push out dents from the underside of the body panel. This is easier said than done, as you simply cannot place your hand behind the panel you need to work with. There are liners and multiple panels that will may need to be removed to get to the working surface. On top of this, PDR is very much a technique of “fine tuning,” meaning that it is easy to push too hard and make the dent worse and/or cracking the paint.
The PDR techniques are applied using three different procedures, depending on their suitability for each particular case: Using metal rods to exert the necessary pressure from the inside out to remove the dent. Utilising hot-melt adhesives that make it possible to work from the outside when the characteristics of the panel or its damage make the use of rods unadvisable or impossible. Applying controlled heat through magnetic induction, a technique developed to restore the original strength of the steel that has been weakened by hard impacts. Thus, the panel recovers its rigidity through controlled changes in the temperature of the affected spot.
Boost your car value. Dents are an eyesore that depreciates the vehicle’s value. You can solve this problem when you opt for the best car dent remover. If your lease is ending soon, getting the car into tip-top shape becomes even more of a priority. Environmentally friendly. Whenever you take your car to the shop for body work, technicians are likely to use power tools to sand the damaged area, add paint primer, and so forth. With the best paintless dent repair kit, you don’t have to deal with the chemicals and toxic mess created through this process. It’s cleaner and safer to get the job done without plugging anything into an AC outlet. Push-from-behind PDR is completed by using specialized tools, including rods, to push the dent from the back of the vehicle’s panel. The deeper and wider the dent, the more time and manual effort it’ll take to fix. The more tools and rods you’ll have at your disposal, the more flexibility you’ll have to fix the particular dent. First and foremost, the dents must be identified and analyzed before making the repair. The PDR Technician will examine each dent, and how he or she will be able to reach behind the sheet metal. Once the Tech has an understanding of how the repair is done, he or she will choose an area to get started on. The Tech uses a suction-mounted LED to help see the intricacies of the dent, even in the day time. In order to better see the dent, technicians prefer to work in an area which is out of direct sunlight.
Joe Dent can fix your car in as little as one day and save you money too. Plus, the factory paint stays intact. You keep your original paint warranty and the rust and chip protection only the original paint can give. We understand how stressful this may be for you. As our vehicle is one of our top expenses and when we get caught in the middle of a hail storm we feel helpless. Joe Dent is an auto hail repair specialist and is here to help. This is how our process works: first we perform a hail damage inspection, followed by a hail repair estimation to your insurance company.
Paintless dent repair: Paintless dent repair (PDR) is a repair technique that has grown in popularity throughout the years. This method entails using special dent removal tools to effectively push out the dent from underneath the body panel to make it look like new on the outside. An alternative technique is to use a dent puller tool to pull the dent outward to achieve a smooth appearance. How to use PDR to fix hail damage: Gain access to the underside of the dent by removing the necessary trims. Use a dent removal tool to gently push the dent outward. We offer hail damage removal tools in an assortment of sizes to safely remove dents small and large. Discover extra details at removing minor dents Colorado Springs, CO.
Getting a dent in your car is one of the certainties in life. Even if you’re the most careful driver, you don’t always have control over out-of-nowhere light posts, runaway shopping carts, misthrown footballs, and so many other things that could hit your car. Minor dings and dents in your vehicle could lead to bigger problems if neglected. When taking your car to an auto body shop, ask them if they perform paintless dent repair. Most experts recommend this method compared to the traditional way of fixing dents because it’s faster and more affordable for customers.