Premium alloy rims manufacturer: What are the pitfalls of buying wheels? Let’s discuss this topic today. Misunderstanding : the lighter the better? Modified industry legend: the spring 1 kg is equal to the spring 10 kg has long been popular, so many wheel modified users in the purchase of wheels, the hub weight as the first evaluation standard, excessive pursuit of lightweight hub. Because the wheel hub is a safety part, the regular manufacturers of wheels are required to pass the strict hub three performance tests: Impact test; Bending fatigue test; Radial fatigue test. Visible, if the hub does not point “weight” is difficult to pass the three performance tests. On the basis of meeting the strength to reduce the weight of the hub is king! Find even more details at alloy wheels wholesale.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17.
If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. Read even more information at https://www.jjjwheel.com/.